Product Description

The Okuma VAC-MM7.5-5.5R-7.55 is a digital servo motor. It is developed for industrial applications. The combination of a servo motor and servo controller forms an effective closed loop control system that can be deployed for a wide range of industrial use cases. The VAC-MM7.5-5.5R-7.55 is rated for 5.5 kilowatts continuous power output. The input voltage rating of the servo motor is 150 Volts. The motor can deliver a peak power output of 7.5 kilowatts for durations of up to 30 minutes. The motor is accompanied by detailed documentation that contains detailed installation instructions. The motor documentation also contains extensive safety instructions. The safety instructions and installation instructions should be read, understood, and implemented. The handling, installation, operation, and maintenance of the VAC-MM7.5-5.5R-7.55 should only be carried out by qualified technical personnel.

A rating plate is attached to the VAC-MM7.5-5.5R-7.55 motor. Important information including the motor type designation, input and output ratings and several performance specifications are listed on the rating plate. The rating plate can be used to easily identify the motor. The information on the rating plate can also be used at the time of ordering replacements and spare parts. Okuma only permits the use of approved spare parts and accessories with the VAC-MM7.5-5.5R-7.55 motor. The permitted ambient conditions for operation including temperature, elevation and relative humidity are specified in the product documentation. The motor must only be operated inside these permitted ambient conditions. If the VAC-MM7.5-5.5R-7.55 motor is operated outside permitted ambient conditions, then its output will derate. The motor components could also malfunction or even fail if the ambient conditions exceed those that are recommended by Okuma. The VAC-MM7.5-5.5R-7.55 motor must be protected from vibrations during storage and operation.