Product Description

The Okuma VAC-MFL7.5-5.5-157T1-R1 is an advanced BL series servo motor. It is designed to deliver 5.5 kilowatts of continuous power output. During continuous power output the motor consumes 37 Amps current. The peak output power rating of the servo motor is 7.5 kilowatts which the motor can sustain for up to 30 minutes. During peak power output the servo motor draws 44 Amps current. The voltage raging of the VAC-MFL7.5-5.5-157T1-R1 motor is 150 Volts. The rated speed of the motor is 1500 RPM, and the peak motor speed is 8000 RPM. The VAC-MFL7.5-5.5-157T1-R1 is used in conjunction with a drive controller. The controller performs two functions: delivers electrical power to the motor and controls motor parameters such as speed and torque. The power cable from the controller connects to the power connector on the VAC-MFL7.5-5.5-157T1-R1.

The VAC-MFL7.5-5.5-157T1-R1 and the controller are also connected by a feedback cable. This cable connects to the feedback connector on the motor. The motor, the controller and all associated cables should be handled and installed by qualified personnel. The personnel involved in motor installation should read and understand the installation and safety instructions provided in the product documentation. Implementation of the safety instruction will ensure that personnel working on the machines will be protected from injury. The motor should only be operated under approved ambient conditions. The operating environment should not contain corrosive gases, vapors, or other contaminants. A VAC-MFL7.5-5.5-157T1-R1 motor that is found to be defective should not be installed. Unused servo motors should be kept in storage where they will be protected from vibrations and corrosive atmospheres. The motor should also be protected from dangerous vibrations during transportation.