Product Description

The E4809-045-216-B motherboard manufactured by Okuma is an integral part of the OPUS 7000 model power supply. The motherboard is sometimes referred to as the main board. This board is the main printed circuit board of the power supply and is responsible for powering it. The power supply is connected to the motherboard through two special connectors with six pins in each of them. These connectors can be connected only in one direction. The board is connected to the power supply through a 20-pin cable that has four other additional disconnected pins. This product is often considered to be the backbone of the power supply.

The product routes the signals to all other boards in the associated power supply. The accessory encompasses several chips and controllers that are collectively referred to as a chipset. The motherboard for a power supply generally has a 20-pin connector although some boards have 24-pin connectors. This connector is likely to have a clip at the top for a clasping action. It should be checked that when the board is replaced it matches with the power supply as there can be a difference in their configuration. The product must comprise a 24-pin input while the power supply should have a 24-pin output. This E4809-045-216-B board is available with one-year backup support.

The motherboard makes use of a voltage regulator module for the conversion of high voltages produced by the power supply to the desired low voltage levels. The product and/or its components may get damaged due to very high power. A motherboard features at least one processor socket to communicate with other components. The associated power supply gets turned on and off by means of signals that are triggered from the board. This motherboard is represented by its size. This motherboard can be sent to your desired destination in any country across the globe.