07.F5.A1D-3B0A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 07.F5.A1D-3B0A is part of the F5 Combivert Axis Drives series. It features a rated power of 0.75 kW, rated current of 2.6 A, and operates on a 3-phase 400 V AC/DC input supply. The drive has a depth of 181 mm, width of 90 mm, and height of 250 mm in a housing with IP20 enclosure.
Internal Product Review
The 07.F5.A1D-3B0A is a KEB Combivert F5 axis drive rated for 0.75 kW with a 3-Ph 400 V AC/DC input. IP20 enclosure and EMC Class C1 make the drive well suited for clean cabinet installations with dependable electrical compatibility. A 16 kHz switching frequency gives motor control a notably smooth character, a key advantage for precision applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F5.A1D-3B0A is an AC axis drive module produced by KEB and belongs to the F5 Combivert Axis Drives series. It is installed between the mains supply and a three-phase motor so that speed and torque can be adjusted through pulse-width-modulated output. In automation lines, the unit serves as the interface that interprets controller commands and delivers the regulated power required for conveyor sections, indexing tables, or general-purpose servo axes. This arrangement lets the drive respond smoothly to starts, stops, and load changes during normal machine operation.
The drive accepts a three-phase input of 3-Ph 400 V AC/DC, and its internal IGBTs switch at 16 kHz to minimize audible noise and improve current resolution. A built-in GTR7 braking transistor provides energy dissipation during ramp-down, eliminating the need for an external chopper. The inverter delivers a continuous mechanical output of 0.75 kW with a maximum phase current of 4.7 A. The protection circuit trips at 216% to safeguard the semiconductors during abnormal current demand. Control logic is carried on a standard board, and because an encoder interface is absent, the unit operates in open-loop or sensorless modes. Its IP20 housing is intended for placement inside a switchgear cabinet where only basic touch protection is necessary.
The D-size housing measures 90 mm in width, 181 mm in depth, and 250 mm in height, allowing back panel installation without extra brackets. Cooling air enters from below, which matches the footprint mounting orientation and supports vertical airflow through the enclosure. During normal duty, the output line current is 2.6 A, and the inverter can withstand a short-time overload of 180% before the overcurrent limiter intervenes. Compliance with electromagnetic emission category C1 permits use on commercial power networks when proper filtering is applied. Because the braking transistor is already installed, only an external resistor bank must be added for regenerative loads.
