05.F5.B3A-090A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 05.F5.B3A-090A is part of the F5 Combivert Axis Drives series and has a rated motor power of 0.37 kW with a nominal input voltage of 230 VAC. It supports a maximum output current of 5 Amps, offers 5 digital inputs, and features an IP20 enclosure rating. The drive measures 191 mm in height, 76 mm in width, and 144 mm in depth, and includes a braking transistor and EMI filter as installed accessories.
Internal Product Review
The 05.F5.B3A-090A is a KEB F5 Combivert axis drive with 230 VAC nominal input and 0.37 kW rated motor power. The IP20 enclosure and installed braking transistor with EMI filter support clean cabinet integration and stable electrical performance. A 5 A maximum output current and 8 kHz maximum switching frequency make the unit a strong choice for precise light-duty axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
KEB manufactures the 05.F5.B3A-090A as part of the F5 Combivert Axis Drives series. This unit is an AC drive intended to regulate the speed and torque of small induction motors in automated machinery, tying the motor shaft directly to PLC-directed motion sequences through its embedded control electronics. It is suited for compact conveyor, pump, and light positioning applications where responsive motor control is required within a small cabinet footprint.
The drive is powered from a single-phase input of 230 VAC, a voltage commonly available in light industrial panels. Under nominal conditions, it delivers a continuous output current of 2.3 A, which aligns with a rated motor load of 0.37 kW. Protection against finger contact and falling small objects is provided by its IP20 enclosure rating. Internally, the power devices switch at a carrier frequency of 4 kHz, which balances acoustic noise and semiconductor losses. The housing measures 76 mm in width, 191 mm in height, and 144 mm in depth, so the unit fits compactly on a DIN rail or panel plate. A braking transistor and an EMI filter are already installed, allowing dynamic deceleration and conducted-emission control without additional modules.
The current can be increased to 5 A for short intervals, giving headroom for acceleration or transient overloads. For higher-resolution current loops, the control section accepts switching commands up to 8 kHz. All signal wiring follows a PNP logic scheme across the 17 control terminals, while five discrete digital inputs handle start, stop, and preset speed commands. Four software I/O channels support parameter-assignable functions such as quick stop or reset. The drive also has 2 galvanically isolated relay contacts for drive-ready and fault signaling to external circuits. The housing is size A within the Combivert platform, and the installed accessories remove the need for an external chopper or mains filter in typical applications.
