Product Description:

The 09.F0.R01 unit is supplied by KEB within the F0 Combivert Control Cabinets series. It functions as a compact control cabinet that houses the electronics needed to modulate inverter output for small-scale motors and auxiliary machine axes in automated equipment. By integrating power switching and low-level reference circuitry in one enclosure, this product simplifies installation and makes it easier to synchronize motor speed with process requirements in conveyor sections, feeders, or light material-handling stations.

The cabinet delivers a continuous apparent power of 2.8 kVA, allowing it to energize induction or synchronous machines up to a mechanical load limit of 1.5 kW. Its power stage can create carrier-based voltage pulses at a selectable output frequency that peaks at 408 Hz, so high-speed spindles or pumps can be driven without mechanical gear changes. Internal control logic supplies a stabilized reference of 15 VDC; paired with a sourcing capability of 30 mA, this output can feed contact switches or simple sensors without an external supply. The housing carries an ingress protection rating of IP20, indicating contact protection for indoor panels while requiring a closed control cabinet for dusty or wet areas.

A dedicated control circuit is safeguarded by a 0.4 A fuse, limiting fault energy on the low-voltage side and preventing damage to signal boards. The assembly remains operational up to a ceiling altitude of 3000 m, which covers most standard production sites and elevated facilities, and it tolerates ambient relative humidity levels as high as 95 % without functional derating when condensation is avoided. Mechanical clearances of 50 mm on the sides plus 100 mm above and below must be maintained for airflow, and a mass of 3 kg permits single-person panel mounting without lifting aids.