Product Description

Bosch Rexroth is mainly concerned about its customer’s satisfaction through its affordable products such as operator terminals, servo motors, and frequency converters. These products are widely used in several motion control systems.

The VPP16.3DBM-4G0NN-D5D-DN-NN-FW model is equipped with a high-speed 2.16 GHz Core Duo T7400 processor and a 4 GB RAM is also installed in this model. The model is mainly used in various industrial sectors to perform quick control tasks and an external uninterruptible power supply is also installed with this unit. The VPP16.3 PC-based operator terminal is highly recommended by our international clients and it can be used as an operator terminal, visualization terminal, and programming terminal. The model should only be operated with the parts and accessories allowed by Rexroth Indramat. The VPP16.3 PC-based operator terminal takes electrical power directly from the 24 VDC power source generated by the attached power supply unit (VAP01.1H-W23-024-010-NN). Only highly trained personnel are allowed to install and operate the VPP16.3 operator terminal and for better efficiency, it must be operated under prescribed environmental and mounting conditions. During installation, the minimum clearance of 50 mm should be maintained on all sides of the model to provide sufficient room for airflow. Make sure that the LED panel must not be covered.

The model VPP16.3DBM-4G0NN-D5D-DN-NN-FW comes with several diagnostic LEDs for diagnosing faults and a reset button is also placed at the top of the PC box. A 12 inches TFT touch screen front panel is placed in this model and it is completely protected against the ingress of dust and liquids whereas, the rear side of the model will not provide any resistance against water due to its IP20 protection category. For customization, various plug-in modules can be installed into the 4 PCI slots of the PC box. The overall dimensions of the VPP16.3 are 290 mm × 350 mm × 123 mm (H × W × D) and the net weight of the operator terminal is 4.9 kg. The ambient temperature on which the model can operate without reduction in rated data is +45 degree Celsius. This unit can be shipped globally with a one-year warranty period from Wake Industrial.