Product Description

The VPB40.4D2M-16GNN-D8D-MN-NN-FW Bosch Rexroth control cabinet PC supports connection to an Ethernet network through its two XETH1 and EXTH2 Ethernet interfaces. This control cabinet PC also encompasses an XDP port to connect a monitor with a maximum 4K resolution using an HDMI cable. The product encompasses configured BIOS that helps in controlling the connected output devices during the booting process. The unit also features three internal interfaces comprising a USB 3.0 port, an mSATA port, and a mPCIe port. The maximum distance from any interference sources must be ensured during installation. The unit should be fitted with USB devices and modules only by authorized personnel.

The PC is fixed into the control cabinet using M5 screws. This system must be removed from the control cabinet after removing all the connected plugs and loosening the fastening screws. The device may get damaged due to electrostatic discharges or non-released extension cards. The product has a series code of 4. It supports the incorporation of a CDI+ control panel interface. The unit supports both vertical and horizontal mounting. The X10 connector of the device is used to connect the 24VDC voltage supply and the UPS. The routing of the CDI cables of the system should be always as far as possible from interference-prone cables. These cables should always be shielded.

The product comprises four LEDs on its connector panel to highlight the device errors and statuses. The unit gets turned OFF automatically when the current consumption of the connected USB devices is more than the maximum permissible limit. The system must not be cleaned using solvents such as diluents. The terminal and plug connections of the components in the device should be checked for damage and proper tightness on an annual basis. This VPB40.4D2M-16GNN-D8D-MN-NN-FW PC has a one-year warranty and can be shipped to your address through our various delivery partners.