Product Description

The TDM3.2-080-300W0 is a servo drive module designed by Bosch Rexroth Indramat to carry out the accurate control of the operation of the MAC synchronous servo motor. This servo drive module is a state-of-the-art device that maintains a high operation efficiency during operation, it has a module design and maintain accurate control over the motor even when it is operating at a high-speed range. The handling of this industrial servo drive module is simple and straightforward, this is due to the user-friendly diagnostic panel, and the status lamps integrated into the device. An MOD programming module is also present in the servo drive module, this programming module features all configuration and adjustment parameters required the module for operation. The module matches the motor to the servo drive, and saves operator the stress of carrying out time consuming adjustment and calibration procedures.

The TDM3.2-080-300W0 industrial servo drive module ensures a high short-time acceleration moment of the connected motorduring operation, it is also suited to function as a torque-controlled drive for mater/slave operation of two motors that are solidly coupled together. The continuous input current required by the servo drive module during operation is about 80 amperes, the servo drive module also operates with a link circuit DC voltage of about 300 volts.

The heat generated by this sophisticated servo drive module during operation is dissipated via natural convection, to aid the heat dissipation process, the servo drive module should be installed at an ambient temperature that falls between +5 to about +45 degree Celsius. The maximum permissible installation height of the servo drive module is about 1000 meters above sea level. Operating the module above this height can cause a reduction in the rated data of the module.