Product Description

The TDM 2.1-030-300-W1-220/S101 is a REXROTH manufactured servo drive module for the MAC servo drive motor for the highly precise operation of the NC machines. The TDM 2.1 servo drive module increasing the accuracy of the motor’s operation. These drives are best for woodworking machines, metal machining, automation system, and transfer lines. These modules are used to achieve special machine applications. The TDM 2.1 servo drive module is the obsolescent special drive for the MAC 63 to MAC 93 INDRAMAT manufactured motors.

The TDM 2.1-030-300-W1-220/S101 servo drive module settles down the frequency and the torque to manage the speed of the motors for machining operation. It is used to convert the whole system into a three-phase controlled system that maintains the frequency, amplitude, and torque of the servo drive MAC motor along with rotor position and maintained the speed for a specific application. The TDM 2.1 module also acts as a torque controller drive in the control unit. The module has the bus connection with the rating plate, plug-in terminals, and MOD programming module for effective controls.

The servo drive module TDM 2.1-030-300-W1-220/S101 has an input rating of 300Amps and a current rating of +24V along with a tolerance rate of +/-15%. Under DIN VDE 0160, the servo drive module can be flush mounted into the control cabinet with a proper ventilation system. During the operation, some of the drives can heat up so it is restricted to install those units underneath the module to avoid heating in the control cabin. The permissible ambient temperature is +5°C to +45°C along with the derating data of +55°C. The elevation for the mounting is prescribed to a maximum of 1000 meters above sea level; an increase in height may cause the inappropriate operation of the drive module. This unit can be shipped globally with a one-year warranty period from Wake Industrial.

Alternative MPN: R911232108