Product Description

The RZP01.1-T2 is a control terminal strip produced by Rexroth Indramat to serve as a connecting interface through which various wires and connectors can be connected to the housing of drive controllers. This strip offers industrial operators a wider range of functionality than the convectional terminal strips used in industrial devices; it contains about four floating digital outputs, two floating analogue outputs, and a differential analogue input with considerable electrical resistance. This extended terminal strip is intended specifically for installation in module slot two of the drive controller as the parametrization that supports the operation of the strip is present only at this position. This control terminal is a very flexible industrial accessory that can meet the operation requirement of a wide range of drive controller series; information on the drive controller compatible with the converter is clearly stated in the device's user manual.

The RZP01.1-T2 extended control terminal is 100 millimetres long and 87 millimetres wide. It requires an electrical voltage supply that falls between +5 to +15 volts from the internal control card for optimum operation. The RZP01.1-T2 is also manufactured with durable materials that are silicon and asbestos-free; it is thus perfectly safe for industrial application. The digital inputs present on this industrial servo drive can accept a rated input voltage that falls within the range of 0 to about 35 volts; the input resistance of these connection points of these terminals is about 3 ohms, while the signal rate canbe as high as 35 volts.

The RZP01.1-T2 extended control terminal should be operated at an ambient temperature than falls between 0 to 45 degrees celisus; the application of the extended control terminal at an ambient temperature above this temperature range can cause overheating, which can affect the efficiency of the device. This unit can be shipped globally with a one-year warranty period from Wake Industrial.