Product Description

The RD52.1-4N-045-L-NN-FW drive control manufactured by Bosch Rexroth supports a 12kHz pulse frequency. This control may have high electric voltage due to incorrect connections. The product must be started only if the machine in which it is installed complies with the national safety specifications and safety regulations pertaining to the application. The device has to be permanently connected to the protective conductor before powering up. The unit is to be fitted with the guards and covers provided before it is switched ON. It has a field-oriented regulation line code of 02. The unit may start moving dangerously at any point of time during operation.

This product should not be put to use if its emergency stop switch is faulty or not in working condition. The device must always be disconnected from electric power with a master switch if it is going to be kept unused for a long time. The unit should be allowed to cool down for at least 10 minutes after it is turned OFF following operation before it is handled. The handling and installing of this drive control are intended to be performed using appropriate lifting or moving equipment or tools. The RD52.1-4N-045-L-NN-FW control features a one-year warranty coverage period from Wake Industrial.

The device has a nominal connecting voltage of 3 x 380 to 480VAC with +/-10% tolerance. The unit has an output frequency in the 0Hz to 1400Hz range. It has an IP 20 degree of terminal in conformity with EN 60529 specifications. The associated chopper has a minimum resistance value of 5.8 Ohms. The product is in compliance with EMC directives relating to noise emission and noise immunity as per EMC product standards for drive controls. The device can be commissioned with prompts through the operator panel that has a graphical display. The control is dispatched through delivery partners like DHL and FedEx to your destination without damage.