Product Description

The RD52.1-4B-007-L-NN-NN-NN-FW is an industrial drive controller produced by Rexroth Indramat to carry out three-phase motion control in the industrial servo system. This controller is perfect for synchronous motors and induction motors which are often used to generate kinetic energy in the industrial servo system. The controller is self-diagnostic, it features special sensors which it uses to monitor the operation of various parts of the industrial servo system in real-time, in the event of an operational error, the operator is promptly alerted through a four-line graphics display which is connected to the controller. This controller can also operate with a high overload capacity. The RD52.1-4B-007-L-NN-NN-NN-FW is perfect for industrial machines that require precise motion control for effective operation, such machines include paper converting machines, food-processing machines, textile machines, and lots more.

The RD52.1-4B-007-L-NN-NN-NN-FW industrial controller can operate with a rated voltage that falls between the range of 380 to 480 volts, it contains a built-in brake chopper which is a protective component that limits the DC bus voltage by the braking energy to a resistor which converts the excess electrical energy to heat energy. The rated power of this controller is 7.5 kilowatts. This controller contains a heat sink that helps to keep the temperature in the controller within the tolerated range.

The RD52.1-4B-007-L-NN-NN-NN-FW industrial drive controller is not supplied with the firmware module, thus operators have to separately order for this module from Rexroth Indramat. The rated current of this controller is 18 Amperes while the peak current is about 23 Amperes. The controller is manufactured according to the IP20 protection class, it can thus resist the penetration of any solid material with a diameter larger than 50 millimeters. This product can be shipped globally with a one year warranty period from Wake Industrial.