Product Description

The RD51.1-5B-011-L-DF-FW Bosch Rexroth servo drive control is likely to have high electric voltage due to incorrect connections. This device must be worked on only by trained as well as qualified personnel. The product operates as a converter that is integrated with a chopper. The unit should be put to use only with spare parts and accessories approved by the manufacturer. The control functioning should happen only if the application is in adherence to the national EMC regulations. This device is to be powered up only after ensuring that its protective conductor is permanently connected as per the connection diagram to the line supply.

The product may have dangerous movements because of faulty control of the motor connected to it. The power connection of this drive control must be isolated from the power supply with the help of an emergency stop circuit. The heatsink and resistors of the device become very hot during operation.  The electronic boards and modules of the unit are to be touched only if absolutely necessary. The control is an integral aspect of a three-phase drive system with a modular software and hardware design. This product is fitted with a line reactor and radio interference suppression filters to lower the harmonics that get fed back into the line supply.

The device is equipped with a power section designed for cooling at the rear. The unit has an IP 20 degree of protection without the connection terminals as per EN 60529 specifications. The control supports Synchrolink or peer-to-peer coupling to enable rapid communication between multiple drives. The installation of the product is to take place only as per the regulations specified in the documentation. The device assists in controlling and monitoring the operation of the connected motor. The unit connection has to be established with only the manufacturer’s cables. This RD51.1-5B-011-L-DF-FW control is sent to your preferred address through reputed freight carriers with a year’s Wake Industrial warranty.