Product Description

Bosch Rexroth offers cost-effective solutions to industrial automation issues. The company provides a number of motion control device series, including frequency converters, drive controllers, and servo motors.

The RD51.1-4N-030-L-DF-FW model includes dependable hardware and components. The supply voltages necessary are AC 380 - 480 V from a three-phase power supply module. The drive converter is protected by an IP20 enclosure and should be used with Rexroth drive applications. The RD51.1 drive converter is intended for use with a variety of inductive and synchronous motors. The module includes enough hardware and software modules to decrease system distortions. This RD51.1 drive converter lacks a brake chopper but is equipped with a rectifier for the supply module. This drive supports forced air cooling up to 110 kW to optimize performance. To help improve the drive's durability, it monitors and alerts the operator when the DC link voltage is too high or low or when the temperature inside the drive surpasses allowable limits, when the braking resistor is defective, or when other circumstances are likely to prevent the drive from performing optimally. Caution is indicated in the documentation and warning information on the products themselves, indicating that comparatively minor injury or significant damage can arise if proper safety measures are not taken.

The model RD51.1-4N-030-L-DF-FW has high working dependability due to its constant power of 30 kW and continual current of 56 A.  The total measurements of the unit (RD51.1-4N-030-L-DF-FW) are 500 mm, 270 mm, 320 mm (Height, Width, Depth), and the unit's weight is around 33 kg. Before installing, the drive converter should be fitted according to the requirements, with a minimum clearance of 100 mm retained at the top and bottom of the converter to enable adequate thermal transfer. This product can be shipped globally with a one year warranty period from Wake Industrial.