Product Description

The RD51.1-4N-007-L-C1-FW drive control installation and connection must be done only as per the instructions specified by the manufacturer. This Bosch Rexroth control has to be programmed before its commissioning so that the motor performs the application-specific functions. The product should never be put to use when there is extreme temperature variation. The product comes with a rated current of 18A at a pulse frequency of 4kHz. The device has IP 20 degree of protection in accordance with EN 60529 specifications. The unit weighs 6.5kg. It incorporates a 22.5mm mechanical grid pattern. The drive control is meant to be installed in a vertical orientation.

The product must have sufficient clearance distance above and below it inside the control cabinet to ensure the unrestricted flow of cooling air. The device has a size of 440 x 90mm. It is possible to place multiple drives close to one another without any space between them. The unit is intended to be installed at a maximum elevation of 1000m over sea level. The AL electrolytic capacitors in the drive control can be stored for up to two years when they are not under power at a temperature of not more than 40°C. This product supports forced cooling action.

The drive control should be serviced and/or repaired only when it is not under power. The product has exposed live parts when it is worked on in an open state. The device must be connected using PVC cables. It is necessary to establish a central connection between the protective earth and reference ground if there is a potential connection between the two controls. The unit is to be positioned such that there is enough clearance from heat-sensitive devices. This drive control is dispatched through a team of reputed freight carriers to any address of your choice with a warranty for one year from Wake Industrial.