Product Description

The NTM02.2 product series are manufactured by Rexroth Indramat and intended to power compatible frequency converters and inverter motors. Belonging to this series is the NTM02.2-230-024-15. This model supplies 24 Volts regulated Direct Current control voltage to HPS01.1 and RZR01.1 units. The design type of this product is two, and it's a line 2 module. It has a nominal input voltage of 230 Volts and a nominal output voltage of 24 VDC. The NTM02.2-230-024-15 can provide a maximum current output of 15 A at its output voltage.

According to EN 60529, the NTM02.2-230-024-15 conforms with IP 20 rating. Air circulation mustn't be obstructed. The minimum clearance distances for inlet air and outlet air of the respective class must not be reduced by additional system structures. The air fed into the NTM02.2-230-024-15 must not contain any gases that could jeopardize the unit's operation, nor must it contain any gases that are electrically conductive or aggressive. Heat is dissipated by this model, which also warms the surrounding area. As a result, it is necessary to maintain adequate clearance around heat-sensitive units.

For optimum operation of the NTM02.2-230-024-15, relative humidity must not be higher than 90 percent, and there must be no moisture in the storage area at all times. The temperature of the surrounding environment must be between 0 and 40 degrees Celsius. The capacitors within the NTM02.2-230-024-15's power section can retain dangerous voltage for about 0.5 hours after the unit has been shut down. This module's noise immunity/Radio interference suppression level meets the requirements of EN 50081-2/50082-2. Also, during regular operation, the environmental class of the NTM02.2-230-024-15 is 3K3. This unit can be shipped globally with a one-year warranty period from Wake Industrial.