Product Description

The MKE118D-035-CP3-KUN is a powerful compact new generation industrial motor produced by Rexroth Indramat. This industrial motor features a very protective housing unit which makes the motor suitable for application in high hazardous areas. This motor is a permanent magnet motor with high electronic commutation, this electronic commutation allows it to carry out continuous start-stop operations with high repeat frequencies. The MKE118D-035-CP3-KUN industrial motor is also designed with numerous sensors and actuators with allow the drive controller to monitor the operation of the industrial motor in real-time. This motor requires two major electrical cables for connection to the industrial drive controller these cables include the motor cable and the power cable. All electrical cables used with the  MKE118D-035-CP3-KUN industrial motor must be well shielded and must not be more than 75 meters long.

This industrial motor contains special grease-lubricated ball bearings which are integrated into the motor shaft, these bearings help to lubricate the motor shaft and also reduce the frictional heat generated at the motor’s shaft. The flange of the supplied with the MKE118D-035-CP3-KUN industrial motor allows for the installation of the motor according to the IM B5, IM V3, and IM V1 positions. However, operators should note that the installation of the motor according to the IM V3 position can cause the lubricating fluid to penetrate after a prolonged time and cause damage to the motor, thus operators should ensure fluid can not be present at the output shaft.

The MKE118D-035-CP3-KUN industrial motor can rotate at a peak speed of 3000 revolutions per minute while generating a maximum output torque of 187-newton meters. . The service life of the integrated ball bearings is about 30000 hours, however, this can reduce significantly if the motor is overloaded. This unit can be shipped globally with a one-year warranty period from Wake Industrial.