Product Description

The MKE118B-024-CG1-KE6 synchronous motor offered by Bosch Rexroth comprises a type plate that highlights its designation and technical details. The motor must be handled using only appropriate lifting equipment such as chain suspensions, eyebolts and lifting sling belts. The product should be fitted with its protective cover and sleeves during storage and transport. The connectors of the device are meant to be opened only when the system is in a de-energized state. The unit should be attached to the machine safely using DIN 912 M12 x 40 screws with 87Nm tightening torque. Its components have to be checked for visual damage before the motor is mounted.

This product should be assembled in a dust-free and dry environment. The device is integrated with a holding brake that secures the axis when the machine that features the motor is de-energized. The unit comes with a winding inductivity of 0.580mH. It is equipped with four pole pairs. This motor has a torque constant of 2.12Nm/A, a winding resistance of 7.60 Ohms and a voltage constant of 130V/min^-1 at 20°C. This product features high overload capability because of a favorable heat dissipation between exterior motor housing walls and the stator windings. We can send the unit to any address irrespective of the country you live in with warranty backing for one year.

The device encompasses a peak torque and supports continuous start-stop operation with high repeat frequencies because of electronic and electrical commutation. The unit depicts a simple and fast startup process because of its data memory. The motor portrays a 32Nm holding brake that works on the electrically releasing principle. Its rotor magnets are designed using special materials for low inertia mass. This rotor has 0.01940 kgm² moment of inertia. The components of the product have a discharge capacity of 0.01940kgm². This device is designed to operate between 0°C and 40°C.