Product Description

The MKE047B-144-CG0-AUNN synchronous motor manufactured by Bosch Rexroth is to be used only with the manufacturer’s DIAX04, DURADRIVE and ECODRIVE range of drives. The product comes with a 1.7m long connection cable. The device features a design as per EN 60079-0/1/31 specifications. The unit renders maintenance-free operation because its bearings are lubricated with grease for their full lifetime. It features IP 65 degree of protection. The motor has low inertia because of the special materials used for its magnets. The product is a good choice for implementation in machine tools. The device may require the fitting of extra sensors and actuators for its controlling and monitoring purposes.

The motor must be assembled, mounted and installed only under the specified environmental conditions. The drive associated with the device should always be operated only by qualified personnel. It may have high electric voltage and high working current due to incorrect connection. The synchronous motor does not have a holding brake. This product encompasses an encoder with 12-bit resolution and a system accuracy of +/-120 angular seconds. The device comes with a length code of B. Its housing adheres to UL standards. This unit is equipped with three pole pairs. This motor must be stored in a place that is free of vibration.

The device comes fitted with protective covers and sleeves that must be removed just before assembly. The unit comes fitted with a type plate that highlights its designation and technical details. It must be handled only using suitable lifting devices such as eyebolts, chain suspensions and lifting sling belts. The product transportation must always be carried out only in the horizontal orientation. The connectors should be removed only when the motor is in the de-energized state. The device is intended for flange assembly. We can send the motor to any country across the globe with warranty support for a year.