MKE037B-144-AG0-AUNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911332458
The Bosch Rexroth Indramat MKE037B-144-AG0-AUNN is a servo motor from the MKE Synchronous Motors series designed for potentially explosive areas. It features a plain shaft with a frontal centering hole, comes with an optical singleturn Hiperface encoder with 128 increments, and is built to UL/CSA compliance standards. This motor has an IP65 rating and uses a terminal box on the A-side for connection.
Internal Product Review
The MKE037B-144-AG0-AUNN is a servo motor for potentially explosive areas with IP65 protection and UL/CSA-compliant housing. The optical singleturn Hiperface encoder and 128 increments provide accurate feedback for stable servo performance. An A-side terminal box connection supports clean integration, making the motor a strong choice for hazardous-area motion systems.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKE037B-144-AG0-AUNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MKE Synchronous Motors series. Classified as a servo motor for potentially explosive areas, it supplies controllable torque and speed to pumps, mixers, and positioning axes where ignition sources must be minimized. By combining explosion-protected construction with integrated feedback, the unit allows closed-loop motion functions to operate directly inside hazardous process zones without relocating the drive to a safe enclosure.
Protection and feedback features shape the electrical interfaces of the motor. The housing carries an ingress rating of IP 65, sealing the stator against dust and low-pressure water jets encountered on production floors. Power and signal leads exit on the A-side, and the wiring is completed in a terminal box that accepts armored conduit typical of chemical facilities. Rotor position is reported by a single-turn Hiperface optical encoder that generates 128 increments per revolution, and this resolution suits drive controllers that require absolute feedback at power-up. Thermal endurance comes from Class 155 (F) insulation, allowing the copper windings to operate well above ambient temperature without premature aging. The motor is delivered without a holding brake, so static load retention must be handled mechanically or by drive torque.
The unit is specified for continuous operation between 0 to +40 °C, so additional enclosure cooling is unnecessary in most indoor zones. A plain shaft with a frontal centering hole simplifies coupling to gear stages, and the journal includes a DIN 332 DS thread to accept extraction screws during maintenance. A positive shaft seal is fitted to limit vapor ingress, while UL and CSA housing compliance supports acceptance in North American plants. The 144 winding code matches coil impedance to low-voltage explosion-proof inverters used with this motor.
