✓ In-Stock!

Wake Industrial LLC is not an authorized distributor of this product.

MKD112B-073-GP1-AN

  • Rated 4.7 (23 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911272677
    In-Stock, Ships 3-5 Days

Current response time:

6 Minutes 20 Seconds

The MKD112B-073-GP1-AN servo motor is a part of the MKD Servo Motor Series manufactured by Bosch Rexroth. This motor's winding code is 073, it incorporates Resolver feedback , operates with a Shaft with Key and is Equipped with a holding brake.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The MKD112B-073-GP1-AN motor is a synchronous motor made by Bosch Rexroth. This motor has an IP 65 degree of protection and a completely closed motor design. The product supports direct overhanging of belt pulleys and pinions because its bearings can withstand high radial loads. The device may get damaged if it is not used as intended. It should not be installed or operated in a damaged or defective state. The unit may incorporate the connection of extra sensors and actuators for controlling and monitoring purposes. The motor must not be used in areas where there is extreme variation in temperature.

It is possible to install the product in any position. The device is fitted with a 22Nm holding brake. This holding brake works according to the electrically releasing principle. The standard design motor is intended for use with the manufacturer’s drive controller. The unit may have high electric voltage due to incorrect connections. The startup should be done only if the machine in which it is installed complies with the standards, safety specifications, and national regulations pertaining to the application. The MKD112B-073-GP1-AN motor is available with a one-year Wake Industrial warranty.

The AC motor must be installed taking into consideration the safety regulations and general construction guidelines related to high voltage installations. The electrical connection points of the product should never be touched when the power is turned ON. The associated drive controller may move dangerously in case of faulty controls such as defective components or improper wiring of the connected motor. Its drives must always be in a standstill mode before making an entry into the danger zone. The holding brake features a 24VDC +/-10% power supply. The output direction of the power connector of the device is towards its A-side. The synchronous motor can be dispatched to your address through any reputed freight carrier.

  • MKD112B073GP1AN
  • MKD112B 073 GP1 AN
  • mkd112b-073-gp1-an

MKD112B-073-GP1-AN Technical Specifications

Driven Shaft: Shaft with Key
Holding Brake: Equipped
Motor Feedback: Resolver feedback
Windings Code: 073
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo