Product Description

The MDD112B-N-040-N2L-130PB1 digital AC servomotor manufactured by Bosch Rexroth has a length code of B. This motor incorporates a housing that is designed to support surface cooling and has a large power connector. The product is designed to support Design B5 mounting with the help of a mounting flange featuring throughholes. The device is utilized in instances where a high degree of synchronism is needed as in grinding machines. The unit has low inertia because of the iron oxide or rare earth materials used for its rotor. It renders maintenance-free operation due to a brushless design and lifetime lubricated bearings.

This motor features a winding inductance of 4mH. The product comprises a floating bearing and a fixed bearing. The device also has a 14Nm blocking brake. The unit deploys a surface cooling mechanism to accommodate extreme loads. It is capable of supporting high radial loads. This motor is meant to be installed at a maximum elevation of 1,000m over sea level. The product has to be used for applications such as pressing, press feeds, punching and similar applications only if it features shock damped or shock decoupled mounting. The MDD112B-N-040-N2L-130PB1 motor can be sent to any address across the world based on your preference with one-year backup support.

The product can be installed in any orientation. The device must not have liquid accumulation at its output shaft over an extended period. The unit portrays a standard pilot diameter of 130mm. Its keyway shaft helps to achieve a form-fitting torque transmission. The permissible radial force of the motor depends on the point where the force is applied and its average speed. The device incorporates a thermal time constant of 60 minutes. The unit is supposed to be reseated before use if it has been stored for more than two years. It is possible to use a straight connector or an angle connector for feedback based on installation conditions.