Product Description

The MAD225C-0150-SA-S2-GG0-35-V1 asynchronous motor offered by Bosch Rexroth encounters damage to its components if high-voltage tests are conducted improperly and repeatedly. This motor comes fitted with a type plate on its housing. The product pickup must not be done by holding on to the fan. This device has to be safeguarded against moisture during transport and storage. The unit lifting and installation into the machine must be done with the help of lifting eye bolts that comply with DIN 580 requirements. It has reduced output when it is operated between 40 °C and 55 °C. This motor must be equipped with its sleeves and covers at the time of storage and transportation.

The product needs a visual inspection to be carried out to determine if its electrical contacts are free of corrosion when the storage period is between one and five years. This device installation is possible only when it is not connected electrically. The unit has to be worked on with extreme care to minimize the risk of damage and accidents. It is attached properly and safely to the associated machine using screws and washers. This motor supports the foot and flange mounting styles. The asynchronous motor is highlighted by backup support for one year.

This product supports mounting holes with an 18mm diameter for flange assembly. The device cannot be mounted with defective components. This unit’s related electrical connections can be carried out only after it has been mounted mechanically. Its fan must be checked to ensure that it is in proper condition after the motor commissioning is done. The motor’s associated electrical connections can be disconnected only after discharge time has elapsed. This product is to be dismounted from the installation machine before it is disassembled. The device housing should be cleaned of dust and dirt after every 1,000 operating hours. This asynchronous motor is sent all over the world to your desired destination.