Product Description

The MAD225C-0150-SA-M2-GG0-35-V1 asynchronous motor produced by Bosch Rexroth supports radial forces at right angles to its mounting surface with foot assembly. This motor modification lowers its degree of protection. The product should have no dirt or fluid accumulation along the shaft with vertical installation. This device has reduced service life if the installation is done upright with the shaft facing upwards. The unit uses a 2K epoxy resin coating as its housing paint. Its housing coat is resistant to diluted acids and lyes. This motor fan is designed to use clean air from its environment. The product incorporates an axial fan for its cooling action.

This device’s associated fan and cooling fins have to be cleaned periodically when the operation takes place in a dirty environment. The unit has a 225 size code. It comes with a rated torque of 593Nm. This motor’s associated vertical axes have to be secured against falling after disconnection by ensuring their sufficient equilibration. The product houses a multi-turn absolute encoder with an EnDat 2.1 interface. This device comes along with a fixed position for the encoder connection. The unit houses its electrical connection on the left side. This servomotor comprises one-year backup support.

The motor comprises a shaft sealing ring around its output shaft. Its shaft sealing ring is made of polytetrafluoroethylene. This product incorporates reinforced bearings that are a combination of deep-groove ball bearings and cylindrical roller bearings. The device encounters radial plus axial loads when its operation takes place. This unit features the maximum allowed radial force based on the force action point and shaft version. Its bearings tend to fail prematurely because of increased mechanical damage. The motor has reduced grease service life for the bearings with unfavorable operating conditions. This product encompasses a protective conductor connection as per EN 60204-1 specifications. This servomotor transportation to its destination is done in custom military-grade packaging.