Product Description:

The MAD180D-0200-SA-S2-EH2-35-N1 is a servo motor manufactured by Bosch Rexroth Indramat within the MAD IndraDyn A Motors series. The model supplies controlled torque and speed to automated axes, letting machine tools, packaging lines, or material-handling stations follow programmed motion profiles without mechanical backlash. A standard bearing set supports radial loads, and the housing accepts both flange and foot mounting so the motor can be fixed to frames or baseplates in various orientations.

Electrical and mechanical interfaces are placed on the A-side where a terminal box simplifies power and signal routing. The smooth shaft is supplied without a shaft seal, so external guarding is required if process fluids are present. The rated speed is 2000 rpm, which is the highest continuous operating speed at nominal bus voltage. An electrically released brake supplies a static holding torque of 240 Nm to secure vertical or indexing loads during power-off states. The enclosure carries an IP65 rating, and the winding insulation is class F for temperature limits up to 155 °C. The motor operates in ambient temperatures from 0–40 °C. A vibration grade of R limits residual imbalance so that precision feedback remains stable.

Thermal management relies on an axial fan that forces air along the stator ribs, preventing heat accumulation during dynamic cycles. Position information is provided by a single-turn absolute encoder EnDat 2.1; its internal disc carries 2048 periods, supplying fine resolution to the drive controller immediately after each power-up cycle. Electrical characteristics correspond to winding code 0200, allowing the inverter to tune current loops without derating. The motor has a frame size of 180 and a frame length of D, which set the overall housing envelope and the mounting space required around the machine axis.