Product Description

The Bosch Rexroth MAD180D-0200-SA-S2-DP0-35-A1 asynchronous motor supports the coating of an additional varnish of a maximum 40µm thickness on its housing. This motor has a length code of D. The product uses an axial fan for cooling purposes. This device depicts thermal overload because of the reduced performance of its fans as a result of pollution. The unit is equipped with KTY84-130 temperature sensors in its stator for motor protection. It must be ensured that the correct polarity is maintained when the sensor is used for an external temperature measurement. This motor is fitted with a single-turn absolute encoder featuring an EnDat 2.1 interface.

The product has a fixed position for the encoder connection. This device is fully balanced with the included key. The unit supports the attachment of gearboxes with an oil bath because of the shaft sealing ring. Its shaft sealing is made of Viton material. This motor incorporates a bearing with high lifetime and availability and without any adverse effect of rotating radial forces. The product type and machine design have to be adapted such that the specified stress limits do not get exceeded at any time. This asynchronous motor has backup support for a year from Wake Industrial.

The device is capable of withstanding only a low axial shaft load irrespective of the installation position. This unit may experience a shift in the position of the flange end of the shaft with respect to the housing because of thermal effects. Its bearings are exposed to inadmissible operating conditions when skew bevel driving pinions are attached to the shaft directly. The motor bearings are likely to experience premature failure because of reduced grease lifetime. This product’s related components may get destroyed because of improperly executed high-voltage tests. The device nameplate must be attached such that it is clearly visible. This MAD180D-0200-SA-S2-DP0-35-A1 asynchronous motor is dispatched to any destination across the world.