Product Description

The MAD180D-0150-SA-S2-HP2-35-N1 IndraDyn A asynchronous motor is designed by Rexroth Bosch. This motor is used in machine tools, printing or packaging machines and paper processing equipment. The motor is designed to work under ambient conditions, proper installation and specified position. The motor's specifications are listed in the code series. The code MAD180D depicts the particular characteristics of the motor, like assigned series (MAD), size (180) and length (D).

The two pole pairs are attached, which affects the speed of the asynchronous motor directly. For example; if the power supply is 60 Hz, the motor coupled with 2 pole pair could easily attain a speed of 3000 rpm. The motor's cable with a 0150 winding has a minimum cross-section of 35 mm². This power cable can handle the maximum current without any damage when the surrounding temperature is approximately 40°C. The current carrying capacity is specified according to the VDE0298-4 (1992) standards. The surface temperature is controlled by axial blowing. The average air flow rate of the blower is 1500  m³/h.

The motor is integrated with an electrically released holding brake of 240 Nm torque. This brake is highly reliable and provides precise control as the electrical signals travel faster. The standard bearings help in the smooth operation of the motor. The output shaft of the motor has a key according to the edition 08-1968 and DIN 6886 standards. The power cable of the motor serves as the path for the signal lines leading to the PTC sensors to reach the controller. The Bosch Rexroth group provides detailed documentation of each product, which includes all connections, technical data, and operational conditions that must be followed while operating the IndraDyn A motor.