Product Description

The MAD160C-0150-SA-S2-AH0-35-H1 is an asynchronous motor manufactured by the Rexroth Bosch group. The MAD series describes blower-cooled asynchronous motors. The type code 160 C refers to the motor's particular size and length. The continuous torque in the 0150 type of winding is 240 Nm at a standstill. The moment of inertia of the rotor without any holding break is 0.311 kgm². These values are based on the IEC 60034-1 standards. The blowing that uses detachable axial fans for the flow of air currents is employed for surface cooling. The fan unit is removable for maintenance.

The blower should be cleaned regularly to avoid thermal load and blockage in airflow due to contamination. It is not permissible to operate the motor without proper ventilation. The IndraDyn A motor is integrated with a single absolute encoder (S2G) that produces sinusoidal signals. The S2G encoder has a high resolution that enables it to differentiate a single revolution of the shaft into 2048 different angular positions using the EnDat2.1 interface. The connector that provides the site for electrical connection is on side A. By use of a 17, 12, or 10-pole flange socket, the connector is attached to the casing.

The plain shaft is used without any sealing and is protected according to particular international protection standards (54). The motor has two mounting options: foot and flange. This makes it flexible and easy to integrate with other equipment according to specific applications. High-speed bearings not only support the radial and axial loads but also minimize friction. The vibration level is standard and does not interfere with the motor's operation. This motor is highly reliable to use in HVAC systems, industrial machinery, and consumer appliances like dryers or air conditioners. Place your order online or visit the store now. Rexroth Bosch Group offers both facilities.