Product Description

MAD160B-0200-SA-S2-HH1-05-N1 is a flange mounted MAD series servo motor from Bosch Rexroth. Flange mounting is a method of attaching one device to another with a flange. A flange is a flat surface on the motor with holes that allow passing of mounting screws. Prior to mounting, operators must ensure that the flange and the mounting surface are clean and properly aligned. Appropriately sized screws must then be passed through the holes on the flange and the mounting surface and tightened with screws or fasteners. Proper tightening is essential for ensuring secure attachment of the motor to the mounting surface. Flange mounting is a reliable method of motor mounting. However, proper installation is essential for ensuring the reliability of the mounting, which has a direct impact on motor reliability and therefore on motor performance.

If required, operators can order MAD motors that support both flange and foot mounting. Other features of the MAD160B-0200-SA-S2-HH1-05-N1 motor include an axial cooling fan, a singleturn encoder for digital feedback, plain shaft without sealing ring, a 100 Nm holding brake, and standard motor bearings. The encoder comes with an EnDat 2.1 interface and supports 2048 increments. The brake works as per the electrical release principle. Voltage and current ratings of the brake are 24 Volts DC and 2 Amps. Its connection time is 70 milliseconds and its disconnection time is 190 milliseconds. Rated performance specifications for the motor include 75.8 Amps output current 33.5 kilowatts output power, and 160 Nm output torque. The motor speed rating is 2000 RPM and the key speed is 1500 RPM. Mass of the MAD160B-0200-SA-S2-HH1-05-N1 motor is 201 kilograms and its protection rating is IP65.