Product Description

The MAD160B-0100-SA-S2-HQ0-05-N1 asynchronous motor offered by Bosch Rexroth is cooled by blowing air from an axial fan. This motor comes with standard bearings. The product might need additional sensors and actuators to be connected for controlling and monitoring it. This device is meant for operation only in its original state. The unit is not recommended for applications that are not explicitly released by its manufacturer. It has to be connected only with accessories and spare parts that have the manufacturer’s approval. This motor usage is allowed only if the application adheres to the national EMC regulations. The product cannot be operated without grounding it properly.

This device will cause a dangerous drive controller movement if it is fitted with defective components. The unit is to be disconnected from electric power for maintenance and repair work. Its surface temperature can be as high as 60°C during and/or soon after its operation. This motor dismounting action must be done only after its pressure has been released. The product weighs 201kg with its fan and without its holding brake that deploys an electrically releasing action. This device encompasses continuous current in standstill mode until its key speed is reached. This asynchronous motor comes with backup support for one year.

The motor fan has a current rating between 19A and 21A. This unit cannot function with a drive controller from any other manufacturer. It has a protective conductor in the motor cable and on the motor housing. The product has an incoming switching voltage based on the cable properties and the line length. This device-integrated holding brake can be activated only while the motor is under speed only when there is a malfunction. The unit is characterized by a high continuous rating. Its type plate must be clearly visible on the housing. This asynchronous motor transportation is done in customized rugged packaging.