Product Description

MAD130D-0250-SA-S2-AG1-05-N1 is an asynchronous servo motor. It is designed and manufactured by Bosch Rexroth. It is known as an asynchronous motor because its shaft speed and input current frequency are not synchronized. It is known as a servo motor because it supports feedback, and is part of a closed loop control system that also includes a motor controller. Typical applications for air-cooled MAD motors from Bosch include metal-forming machines, packaging machines and printing machines. Frame size for the MAD130D-0250-SA-S2-AG1-05-N1 motor is 130; the frame size is derived from the mechanical dimensions of the flange on the output side and represents different power ranges. Frame length for the motor is D and the winding code is 250. The rated motor torque is 120 Nm. The rated motor power is 31.4 kilowatts. The rated motor current is 72 Amps.

Speed rating of the MAD130D-0250-SA-S2-AG1-05-N1 motor is 2500 RPM and the maximum speed is 7500 RPM. Maximum values for output torque, power and current are 310 Nm, 64.37 kilowatts and 123 Amps respectively. The motor has three pole pairs. Its mass is 165 kilograms. An optional holding brake rated for 80 Nm holding torque is installed on the motor. This brake operates at 24 Volts DC and draws 1.6 Amps during operation. An axial cooling fan is also installed on the MAD130D-0250-SA-S2-AG1-05-N1 motor to increase airflow across the housing. The fan helps to ensure that the ambient temperature does not exceed 40 degrees Celsius. Additional motor features include a plain shaft with seal, integrated singleturn encoder, and power connector on side A. Protection rating of the motor is IP65. The optimized motor design allows use under adverse conditions. An easy-to-service structure for MAD motors leads to a reduced requirement for maintenance.