Product Description

The MAD130D-0150-SL-S6-EP0-35-N1 asynchronous motor provided by Bosch Rexroth requires minimum maintenance when it is used as intended. This motor houses a fan top with a fan cowl for the cooling to take place. The product has the ability to ensure high permanent performance because of its asynchronous nature. This device is to be used in its original state without any structural modifications. The unit has a 0150 windings code. It has continuous torque of 170 Nm and a continuous current of 64.1 A in standstill mode. This motor is suitable for operation in paper and food processing machines. The product is supposed to be associated with only components, accessories and cables approved by the same manufacturer.

This device is not recommended to be operated when there is extreme temperature fluctuation or the maximum temperature is very high. The unit installation has to be done at an elevation of 1000m above sea level. It may cause untoward consequences if the warnings in its documentation are not followed. This motor will often have high electric voltage when it is not connected properly. The product portrays the Class 3K4 climatic category during operation as per EN 60721-3-3 specifications. This device experiences a temperature change rate of 0.5 °C/min when it is in operation. This MAD130D-0150-SL-S6-EP0-35-N1 asynchronous motor comprises a backup support period valid for one year.

The motor features sine-shaped vibrations in stationary mode. The unit can withstand up to 150 m/s² radial shock stress for 11ms. It is ideal for operation in potentially explosive areas. This product features protection against a water jet sprayed through a nozzle from all directions. The device has Class F insulation in accordance with DIN EN 60034-1 specifications. This unit has three pole pairs. Its rotor has 0.164 kgm² moment of inertia. The motor has standard bearings and A-grade vibration severity. This product must undergo an acceptance test if it has been replaced. This asynchronous motor is shipped to the destination in rugged packaging.