Product Description

The MAD130C-0200-SA-S2-GL0-05-A1 is one of the most sophisticated productions of Rexroth Indramat. It is an air-cooled industrial asynchronous motor designed to accurately serve as a rotary main with a wide range of industrial machines including metal forming machines, food processing machines, paper converting machines, and lots more. This industrial motor is designed to meet high quality and operational standards before it is delivered to the end user, it is tested and certified to be perfectly safe for industrial operation, the motor is also coated with a special black paint which is resistant to corrosive liquid substances such as dilute acid, dilute alkali, sewage and mineral oil. The MAD130C-0200-SA-S2-GL0-05-A1 industrial motor is also an environmentally friendly device, it is produced with energy and resourced optimized production processes with allow re-using and recycling of production waste. During operation, this industrial motor generates an average noise pressure of about 70 decibels.

The MAD130C-0200-SA-S2-GL0-05-A1 industrial motor contains a single-turn internal encoder which provides the drive controller with the electrical signals it requires to accurately control the operation of the motor according to pre-determined configuration parameters. The rated input current required by this industrial motor during operation is 48.9 amperes, at this current the motor generates a rated power output of 18.4 kilowatts and an output torque of 117-newton meters. The nominal speed of this industrial motor during operation is 1000 revolutions per minute, however, at a maximum input current of 93.3 amperes, the motor operates at a maximum speed of 9000 revolutions per minute.

The MAD130C-0200-SA-S2-GL0-05-A1 industrial motor is designed to be used at an ambient temperature that falls between 0 to about 40 degrees Celsius, however, when the motor is not in operation, it can withstand an ambient temperature as high as 80 degrees Celsius.