Product Description

This particular model, the MAD130C-0200-SA-S2-BP1-35-V1, is categorized as an asynchronous servo motor. This product is manufactured by Rexroth Bosch. We recommend employing a power wire with a cross-sectional specification of 2.5 mm for this rotor. The rotor holds a moment of inertia rating of 0.00056 kg/m2. The motor has a mass of 39 kg. The peak speeds we measured with the native bearing were 9000 nmax rpm for the standard, 11000nmax rpm for the high-speed, as well as 6300 nmax rpm for the coupling. The thermal duration value is set at 30 mins. The noise degree is 70 decibels.

The mechanism that is released electrically has an engagement time of 30 ms, while the mechanism that is clamped electrically has an engagement time rating of 0.9 ms. The brake has a maximum speed of 10,000 mph, just like a lightning bolt. The brake has a mass of 1.6 units. Regarding the axial blower, the connection's voltage rating is 3 x 400 Volts. ± 15%, and it has a perpetual frequency grading of 50/60 Hertz. The power requirement ranges from 83 to 100 VA. The blower's current measures 0.12 amperes. The average rate of airflow is 230 m3/h.

For optimum performance, it is essential to use a fan that directs air currents from the air guide plates over the motor's surface ("surface ventilation"). The air current is referred to as "blowing" based on the accompanying figure. The four-digit sequence of figures demonstrates the rated speed for the specific type of winding. For a rated speed of 2000 rpm, the winding ID 0200 is used. The fan unit is simple to remove for maintenance purposes. Operating without proper ventilation is not permissible. A flanged socket-outlet or a terminal box is used to establish the electrical connection. When motors are ordered with a keyway, a key is always included.