Product Description

MAD130C-0200-SA-S2-AG1-05-N1 is an air cooled MAD series motor from Bosch Rexroth. It is an asynchronous motor: its speed is not in sync with the input frequency current. The motor is designed for surface cooling and comes with an axial cooling fan. The fan requires 3-phase AC input and produces 350 cubic meters per hour airflow. At 400 Volts AC, the fan draws 0.19 Amps current and at 480 Volts AC the fan draws 0.18 Amps current. At 400 Volts AC the fan power consumption is 132 VA and at 480 Volts AC the power consumption is 151 VA. The MAD130C-0200-SA-S2-AG1-05-N1 motor is also equipped with an 80 Nm blocking brake that operates according to the electrical release principle. Rated voltage for the brake is 24 Volts DC and its rated current is 1.6 Amps.

Connection time and disconnection time for the brake are 50 milliseconds and 140 milliseconds respectively. Rated torque output of the motor is 110 Nm and the maximum torque output is 252 Nm. Rated power output of the motor is 23 kilowatts and the maximum power output is 47 kilowatts. Rated current output of the motor is 57 Amps and the maximum current output is 106 Amps. Nominal speed rating is 2000 RPM and the maximum speed rating is 7500 RPM. The motor works in combination with a servo controller. The power from the controller arrives via a power cable that connects to a power connection on side A of the motor housing. The MAD130C-0200-SA-S2-AG1-05-N1 motor has a plain shaft with a sealing ring. This seal prevents dust and moisture ingress and also prevents oil leakage. Bosch has designed the MAD130C-0200-SA-S2-AG1-05-N1 for flange mounting only.