Product Description:

The MAD130C-0150-SA-S0-BQ0-05-N1 is a servo motor built by Bosch Rexroth Indramat for the MAD IndraDyn A Motors series. In industrial automation, it delivers commanded torque and speed so that axes can position or feed material with closed-loop accuracy. The motor converts electrical drive signals into mechanical rotation while maintaining the response needed for synchronized production processes. This operating role makes it suitable for machinery that depends on steady speed regulation, repeatable positioning, and coordinated motion over long production runs.

At its nominal point, the rotor reaches 1500 rpm, which serves as the reference speed for the motor’s torque and current ratings. Heat is removed by an axial fan, enabling continuous duty inside the published 0–40 °C ambient window without derating. The housing carries an IP65 protection rating, so internal components remain isolated from dust and low-pressure water jets often encountered on factory floors. Standard rolling bearings support the shaft, and the B-side connector groups power, feedback, and grounding conductors on one face to help keep cable routing organized. Motor frame size 130 and frame length C provide the stator volume, while Insulation Class F allows the winding system to tolerate elevated operating temperatures. The whole-key balanced shaft comes without a shaft seal, which reduces friction where external contamination is controlled.

Position information is generated by a single-turn absolute encoder, which provides 512 counts per revolution to the control loop. Electromagnetic characteristics follow the 0150 winding code, aligning resistance and inductance with compatible servo amplifiers. Because the unit ships without a holding brake, external mechanical retention is required if load torque must be maintained when power is removed. The motor uses flange mounting, and operational smoothness is supported by the R vibration grade, which indicates tighter rotor balancing than standard production. The connector interface also allows quick disconnection when the motor must be removed from the machine.