Product Description

This motor, with the Catalog ID MAD130C-0100-SA-S2-HQ0-05-V1, is a servo motor (asynchronous). Bosch Rexroth is the company that is in charge of its development. The servo's rated torque is 50 Nm. The speed is calculated to be 1000. The rated power for this motor is 13.2 amperes (A). The standstill torque rating is 54 Nm. If the product documentation stipulates, it is necessary to use special tools. Ensure proper and safe usage of lifting devices and tools. Ensure safety by wearing the necessary protective gear, such as safety glasses, safety shoes, and safety gloves.

The standard has a value of 6000 nmax rpm, and when a coupling attachment is used, the maximum speed is also 6000 nmax rpm. Lastly, the peak speed is calculated at 6000 nmax rpm. The thermal time rating for the constant state is set at 30 minutes. It is important to avoid touching housing surfaces that are near sources of heat. Risk of burns is a possibility if proper precautions are disregarded.

An optional holding brake can be included with this asynchronous servo motor. The motor's transmittable torque is rated at 30 nM. The voltage of the connection is 24 ± 10% Volts, which is in the form of direct current (DC). The rated current is 0.9 amperes. The moment of inertia has been determined to be 0.00056 kg/m2. For optimal performance, it is cruical to ensure that the braking energy stays below 10,000 Ws. The disengagement time from power is estimated at 50 ms. The engagement time is highly precise, clocking in at a remarkable 42 milliseconds. For this motor, the brake's maximum speed is 10000. The brake on this motor has a mass of only 2 kg.