Product Description

The MAD130C-0050-SA-S0-AH0-05-N1 is a Rexroth IndraDyn A Series Asynchronous Motor with winding 0050. This motor has size 130 with size C. The MAD130C-0050-SA-S0-AH0-05-N1 motor has a rated speed of 500 rpm and at maximum speed, it can attain a torque of Nm. The motor can output a rated torque of 140 Nm and requires a power of 7.3 watts while drawing a current of 19.7 Amperes. The motor has a Torque constant at 20°C of 9.31 Nm/A allowing the motor to be used for heavy-duty applications without any electrical stress. It is recommended to use power cables with a minimum cross-section of 2.5 mm to prevent overheating of the wires.

Since this motor is an Asynchronous motor it has 3 poles that can be excited individually with the help of frequency inverters to vary the speed of the motor. The motor can reach a maximum speed of 3000 rpm with standard bearings. To cool the motor’s internals the MAD130C-0050-SA-S0-AH0-05-N1 relies on an Axial blowing fan that sucks the air from the surrounding inwards causing it to flow through the internals of the motor.

To control the position of the motor shaft the MAD130C-0050-SA-S0-AH0-05-N1 features a single-turn absolute encoder with 512 increments. This encoder outputs a signal with 512 high levels peaks meaning that the motor takes 512 steps to complete one revolution. The higher the step count, the higher the accuracy of the encoder. The motor comes with a plain shaft without a shaft sealing ring. This motor does not feature a holding brake causing the motor to spin continuously due to inertia once power is cut off. To mount the motor, users can attach it to a supported flange mount to keep it steady.