Product Description

The MAD130B-0200-SA-M2-BP0-35-N1 asynchronous motor produced by Bosch Rexroth houses an electrically releasing brake. This motor brake holds the axes in standstill mode when the controller enable signal is off. The product has a windings code of 200. This device is suitable for all rotary driving tasks. The unit has to be utilized only after reading as well as understanding the instructions pertaining to intended use and safety. Its installation should be done as per the regulations mentioned in the related documentation. This motor operation is to be carried out only in the explicitly mentioned combinations and configuration of its components. The product cannot operate properly for use underwater.

This device is balanced with a complete key. The unit triggers dangerous drive controller movements because of incorrect operation. Its vertical axes have to be secured against falling after the power is switched off by adding an external braking mechanism. This product can take up to 140 minutes to cool down for cooling down. The device transportation is intended to be done using suitable protective equipment. This unit needs warming up at 1000rpm speed for an hour before the normal startup when the period of storage is between one and five years. The asynchronous motor features one-year backup support.

This product comprises lifting eye bolts that have to be screwed down completely to the stop face before its transport. Its protective sleeves must remain intact until the time of assembly. The device encounters vibration severity as per DIN 60034-14 specifications. This unit has threaded holes on its long side. The motor uses cylindrical or hexagonal screws as well as washers for its attachment to the machine. This product-related lower air plates on its side have to be dismounted for free access to the mounting holes as part of its foot assembly. The asynchronous motor is delivered in durable rugged packaging.