Product Description

MAD100C-0100-SA-M2-EQ0-05-N1 is an asynchronous MAD motor from Bosch Rexroth. It is a surface cooled motor with a permanently connected fan unit. MAD series asynchronous motors are designed to be used as rotary main and servo drive motors. Typical fields of application for these motors include machine tools, printing and paper-processing machines, packaging and food-processing machines and metal-forming machines. MAD motors must only be used with the accessories specified by Bosch in the relevant product documentation. Components not specifically in the documentation must not be attached nor connected. The same is valid for cables and other lines. Motor operation must only be carried out in the explicitly mentioned configurations with component combinations and with software/firmware specified in the relevant functional description. The MAD100C-0100-SA-M2-EQ0-05-N1 is a motor with an axial cooling fan. It is also equipped with a multiturn absolute encoder.

The encoder has an EnDat 2.1 interface and supports 2048 increments. The main motor shaft includes a key and is balanced with the entire key. A holding brake is not installed on the motor. A flange on the motor allows secure mounting. Standard bearings are installed and the vibration severity grade is A. Rated output torque of the MAD100C-0100-SA-M2-EQ0-05-N1 motor is 50 Nm. The rated output power is 5.2 kilowatts and the rated current output is 13.2 Amps. Nominal speed rating of the servo motor is 1000 RPM. Mass of the servo motor is 58 kilograms. The rotor moment of inertia is 0.0284 kg m². The optimal ambient temperature for operation is 0 to 40 degrees Celsius. Installation class of the motor is 155 according to DIN EN 60034-1. Trained professionals should handle and install the motor.