Product Description

This servo motor's product ID is MAD100B-0200-SA-S2-EP0-35-N1, and it works asynchronously. The product was both developed and produced by Bosch Rexroth. The specified torque for this Bosch Rexroth motor will be 28 Nm. The speed rating is 2000. The power rating stands at 5.9 kW (kilowatts). The current load capacity was calculated at 14.6 amperes (A). We calculate the torque to be 30 Nm when the rotor remains stationary. The speed (derating) is 1500 rpm. The steady current is 15.3 amperes. The maximum possible speed is 66 Nm. At an optimal temperature level of 20 degrees Celsius, the torque remains steady at 2.41. The total number of pole pairs that this motor can support is three (03).

The maximum possible velocity with bearing is: for the standard configuration, the maximum speed is 9000 rpm; with the coupling attachment, the maximum speed is 6300 rpm; and for the high-speed setup, the maximum speed can reach 11000 rpm. The time constant (thermal) was measured at 30 minutes. The noise grade is 70 decibels; a further three decibel increase will take place in relentless heavy-duty deployment. The appropriate span for the ambient temperature spans from 0 to 40 degrees Celsius.

The acceptable range for transport and storage temperatures is between -20 and +80 degrees Celsius. The insulation grade is defined as "F" according to DIN VDE 0530-1. The transmission torque is 24 nM (Newton meters). The rated voltage of the connection should be direct current (DC) 24 ± 10% volts. The current rating is 1.1 amperes. The moment of inertia rating for this servo motor is 0.00056 kgm2. The maximum authorized energy for braking is 20000 watt-seconds (Ws).