Product Description

The Bosch Rexroth KDS1.3-200-300-W1 servo drive has an external heat exchanger with the heat sink attached to it. This drive is used for applications that demand high speed as well as position control. The product delivers a three-phase system that is controlled in accordance with frequency, amplitude, and phase. This device runs at a controlled speed after the mains voltage is applied and the drive amplifier signals the ready state. The unit has one differential input and two summing inputs. It should be ensured that the emergency stop switch of the machine in which the servo drive is operated is in working condition. This drive has an independent shutdown irrespective of the controller after the external controller enabling signal is removed. The product should always be checked for drift when it is first operated after an exchange. This device related peak torque can be reduced according to the operating conditions of the machine through the analog voltage input. The unit must have isolation of the power section from the power supply through the mains contact for its safe stopping. Its mechanical assembly kit weighs 1.7 kg. This drive is cooled by forced ventilation. The product has a current capacitance of 50 mA at the X25 terminal at 24 V control voltage. This device depicts Class C insulation as per DIN VDE 0110 specifications. The unit must always be erected only in the specified orientation. It has a current rating of 200 A. This drive must be free of condensation when it is being operated.