Product Description

The KDS1.1-50-300-W1/220 Bosch Rexroth servo drive must not be used near high-frequency equipment. This drive should be operated only in a closed control cabinet. The product has an IP 10 protection class according to DIN 40 050 specifications. This device features a hot surface that should not be touched when it is in use. The unit must be disconnected from the power supply when is being cleaned or serviced. Its components tend to get damaged because of electrostatic loads. This drive related parts should be placed on a conductive surface. The product portrays Class F humidity according to DIN 40 040 specifications. This device must always be set up in a clean environment. The unit is meant to be stored and transported at a temperature ranging from -30 °C to 85 °C. It should not be subject to excessive shock loads and oscillations. This drive must be assembled according to the assembly guidelines. The product is commissioned using tools like a setpoint encoder with battery and multitesters. This drive associated programming module must not be replaced when the power supply is on. The product must have adequate clearance distance above and below it inside the control cabinet. This device should encompass a firm fit and safe contact of all its electrical connections at the terminals. The unit supports cold-running technology. It is matched to the motor using the capacitors and resistors soldered in its programming module. Its MOD programming module helps in reducing the repair time. This drive is equipped with three phases. The product has a voltage rating of 115 VAC for the mounted fan.