Product Description

The KDS1.1-150-W1 Bosch Rexroth servo drive has an IP 10 protection class. This drive has a modular structure. The product experiences most of the heat loss outside the control cabinet. This device incorporates forced ventilation through an external fan. The unit is mounted using a mounting frame onto the back wall of the control cabinet. Its control cabinet is tightly sealed at the opening using a gasket at the mounting flange. This drive features a maximum ambient operating temperature of 55 °C. The product must have sufficient clearance from adjacent units to ensure heat transmission and circulation. This device is designed for industrial use and should be used only as intended. The unit has a model code of 1. It is not allowed to make any constructional modifications. This drive is connected to the fan using the M1-KD mechanical assembly kit. The product has a tightening torque of 5 Nm for its three motor terminals. This device should be connected using only the cables provided by the manufacturer. The unit has a terminal strip for the user inputs and outputs at the X25 and X26 connectors. Its link circuit bus bar is equipped with two terminals. This drive must be secured in standstill mode before entering the danger zone. The product should be activated only after ensuring that sufficient accident prevention measures have been implemented. This device comprises a TU contact that opens when the equipment temperature is very high. The unit along with other servo drives can be connected to a single power supply. It is designed for operation at a temperature ranging from 5 °C to 45 °C.