KDS1.1-100-300-W1/115A

Product Description

The Bosch Rexroth KDS1.1-100-300-W1/115A is a high-performance servo drive that is equipped with a heat sink attached to a heat exchanger. The heat exchanger is mounted at the back of the drive. This unique feature ensures that the machine operates at an optimal temperature without any overheating. The drive module generates a 3-phase system, which is controlled as per the amplitude, frequency, and phase. The 3-phase system is then applied to the MAC servo motor based on the current rotor position and desired speed. The drive can also be operated as a drive controlled by torque. The KDS drive incorporates a rating plate that lists the technical details. The device and its power supply module form flush mounting equipment as specified in DIN VDE 0160. They are designed to be mounted in a control cabinet. IP 10 is the protection category of the product. The unit has a fan for cooling. If power requirements are higher, an external fan can be supplied. The electrical components of the ventilation are located within the control cabinet. The fan rotor and the heat sink of the power section can be found outside the housing or control cabinet. The KDS drive is mounted using a mounting frame in a space on the rear wall of the control cabinet. The drive must be operated within an ambient temperature range of 5°C to 45°C within the control cabinet. The control cabinet must always remain closed during normal operation to ensure adequate high frequency shielding of the internal wiring of the electronic equipment and the control cabinet. When operating the device, safety guidelines must be observed strictly. Safety measures like bars, protective fences, covers, and light barriers can be undertaken.