Product Description

The Bosch Rexroth KDS 1.3-150-300-WI servo drive has a design code of 1. This drive uses an external fan to support its cooling action. The product depicts a link circuit voltage of 300 VDC. This device is also equipped with an external heat exchanger to avoid heat losses inside the control cabinet. The unit must be handled by only skilled and trained personnel. It is not suitable for residential use. This drive is meant to be retained in its original state without any structural changes. The product can function as a master-slave drive. This device is used to support the operation of machine tools as well as handling and automation systems. The unit must be disconnected from the mains before accessing its electrical parts that have a voltage potential of more than 50 V. Its programming supports adjustable input weighting through three potentiometers. This drive has a torsionally stiff mechanical coupling when a master-slave drive operation is opted for. The product is matched to the motor type using the plug-in MOD programming module. This device has two summing inputs for its set points. The unit incorporates a flush mounting style according to DIN VDE 0160 specifications. It has a modular structure. This drive can be connected along with other drives to a single supply unit. The product related power installation must be done by taking care to ensure that the general safety and installation regulations are followed. This device has a hot surface during and soon after its operation. The unit must be connected using only cables provided by the manufacturer.