COVID-19 Update: Wake Industrial is open and available to support your automation needs.

HMS02.1N-F0070-A-07-NNNN

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
  • MPN: R911321332
  • Call for Expedited Shipping and Product Condition Options
The HMS02.1N-F0070-A-07-NNNN Drive Controller is manufactured by Rexrtoh Indramat Bosch. This drive controller is Not Equipped with a power supply and has an Liquid Cooling cooling mode. The maximum current of this drive controller is 70 A and the nominal current is DC 700 V.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

HMS02.1N-F0070-A-07-NNNN

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
  • MPN: R911321332
  • Call for Expedited Shipping and Product Condition Options
The HMS02.1N-F0070-A-07-NNNN Drive Controller is manufactured by Rexrtoh Indramat Bosch. This drive controller is Not Equipped with a power supply and has an Liquid Cooling cooling mode. The maximum current of this drive controller is 70 A and the nominal current is DC 700 V.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a HMS02.1N-F0070-A-07-NNNN to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The HMS02.1N-F0070-A-07-NNNN power section produced by Bosch Rexroth must be used with the manufacturer’s HMV series DC power supply and inside a drive controller. This power section should be operated only with the connected equipment grounding conductor and the plugged-on connectors. The device is capable of operating at a temperature of 55° with derated data. The mounting of the unit must be done properly and correctly for its safe and optimal operation. The product installation should be in adherence to the general safety and installation instructions. The unit must be touched only after half an hour of switching it OFF so that the live capacitors get discharged completely.

The plug-in connectors of the device must not be removed when it is powered. The drive encompassing the module must be brought to a safe standstill before the danger zone is accessed. The section should be disconnected when it is being cleaned or repaired and if it is to be kept unused for a long duration. It comes with 70A maximum current rating. The unit is fitted with a type-plate that provides details such as device type, part and serial numbers, hardware index, and bar code. The power section supports a connection to a 24VDC power supply.

The product features a 700VDC DC bus nominal voltage rating. The surface of this device is likely to become very hot when in use and can cause burns. The associated drive controller should be operated only in those machines that are used in industrial environments. The 24V power supply of the unit assists in brake control through the X6 pin of the power section. The motor power cables used with the module must be shielded and its length must be as short as possible. This HMS02.1N-F0070-A-07-NNNN power section is available with a one-year warranty and can be delivered to your preferred address. This unit can be shipped globally with a one-year warranty period from Wake Industrial.

HMS02.1N-F0070-A-07-NNNN Documents

  • HMS021NF0070A07NNNN
  • HMS02 1N F0070 A 07 NNNN
  • hms02.1n-f0070-a-07-nnnn

HMS02.1N-F0070-A-07-NNNN Technical Specifications

Cooling Mode: Liquid Cooling
Maximum Current: 70 A
Nominal Current: DC 700 V
Power Supply: Not Equipped