Product Description

The DDC01.2-K050A-D is an industrial drive controller produced by Rexroth Indramat for accurate motion control in the industrial servo system. This drive controller is manufactured by well-trained technicians, it meets the international quality standard and it helps industrialist to maximize production due to its ability to independently adjust the movement of the motor to meet the parameters pre-determined by the operator. The DDC01.2-K050A-D is also microprocessor-controlled device. The operation of the industrial controller can be adjusted to suit machines that require single axis control the insertion of the DLC single axis positioning control module into the housing unit of the drive controller. The controller is produced according to the IP65 protection category, it can be equipped with a forward feed unit which eliminates the need for the power and motor cables.

The DDC01.2-K050A-D industrial drive controller regulates its internal temperature through air ventilation, it is designed with a heatsink and an air blower which makes this process feasible. The DDC01.2-K050A-D industrial drive controller generally does not require any maintenance operation, however if it is operated in a polluted environment, operator should ensure that the heatsink and the air duct are regularly cleaned as they can become clogged with dust particles filtered from the external air.

The DDC01.2-K050A-D drive controller is designed to operate with a rated current of about 50 Amperes, it features a bleeder a resistor which is likely to heat up during operation thus any flammable substance would not be placed within 300 millimeters of the drive controller. If the drive controller is to be operated with both the motor feedback cable and the power cable, then these cables must not exceed 75meters in length. This unit can be shipped globally with a one-year warranty period from Wake Industrial.