DDC01.1-K150A-DL20-01-FW

Product Description:

The DDC01.1-K150A-DL20-01-FW servo drive manufactured by Bosch Rexroth is a three-phase current drive. The drive operates as a one-axis positioning controller because of its integrated positioning module with a single axis. The product has a series code of 1 and a version code of 1. It is possible to combine multiple devices with a single power supply unit that is connected directly to a 3 x 380 to 460VAC, 50 to 60Hz three-phase mains. The drive controller associated with the unit has an IP 65 degree of protection and has a compact housing as its enclosure. This controller can be installed directly on the forward feed unit that can function as a standalone unit.

The positioning module of the drive features a user-oriented programming language and can be programmed by a SOT programming terminal, an IDA decade switch unit, or a CTA programming keypad. The monitoring, controlling, diagnosis, and parameterization of the servo drive is carried out digitally with a signal processor based on the measurement of the position of the rotor. The product in its configured state encompasses a basic unit, a configuration rating plate, a software module, and an optional auxiliary plug-in module apart from its DLC single-axis positioning module.

The basic unit features five empty slots. The fifth slot is reserved for the software module. The front panel of the device encompasses an S1 fault reset key and anH1 seven-segment diagnostics display. This display highlights the operating mode or status as well as the associated warning and error messages. The operating states are displayed as letters and numbers less than 10. The unit displays the “bb” code on its display if there is no error during initialization and the drive is ready to turn ON the power. The servo drive can be shipped through freight carriers such as DHL and FedEx with a one-year warranty.